Riverstone Networks RS 8000 Betreibershandbuch Seite 100

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 158
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 99
3-14 Riverstone Networks RS 8000/8600 Switch Router Getting Started Guide
Installing the Hardware Hardware Installation
Figure 3-10 GBIC module
To install a GBIC module into a GBIC line card perform the following steps:
1.
Hold the GBIC module by the edges with the network port facing away from the line card, and
position the GBIC module so that it is parallel with the slot door. The 20-pin connector should be
facing toward the empty GBIC slot of the line card, see Figure 3-11.
Figure 3-11 Inserting a GBIC module
Top side of GBIC
Alignment Slot
(both sides)
Extractor
Tabs
20 Pin Connector
(rear of the GBIC)
Insert GBIC through spring-loaded
door. GBIC is keyed, and will
fit only if oriented correctly.
To remove,
press tabs on
top and bottom
of GBIC and pull.
Seitenansicht 99
1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 157 158

Kommentare zu diesen Handbüchern

Keine Kommentare