Riverstone Networks WICT1-12 Spezifikationen PDF herunterladen (Seite 52)

3-2 Riverstone Networks RS 32000 Switch Router Getting Started Guide

Hardware Specifications Hardware Installation

• It is recommended that you use a support tray under the RS 32000 chassis when installing in an

equipment rack (see Figure 3-1). This is especially advisable for chassis that are fully populated with

line cards and power supplies.

• When installing components into the rack-mounted chassis, maintain a balanced and even

distribution of components in the chassis. For example, even though power supplies and line cards

can be installed in any available slot, you should not install all components on one side of the chassis.

• Maintain reliable grounding of rack-mounted equipment, with particular attention to power supply

connections other than direct connections to the branch circuit (i.e., use of power strips, etc.)

3.2 HARDWARE SPECIFICATIONS

The following table lists the physical and environmental specifications for the RS 32000.

Table 3-1 Physical and environmental specifications

Specification Measurement

Dimensions Inches: 19.0” x 19.0” x 35.0”

Centimeters: 48.26 cm x 48.26 cm x 88.90 cm

Weight (out of shipping crate)

Pounds: 124

Kilograms: 56.25

Weight (fully loaded)

Pounds: 225

Kilograms: 102.06

AC power 100-120 VAC, 16A maximum per power supply;

24A total maximum per system

200-240 VAC, 8A maximum per power supply; 12A

total maximum per system

50-60 Hz.

DC Power 36-72V, 50 A @ 48 V nominal

Operating Temperature Fahrenheit: 41

F to 104

Centigrade: 5

C to 40

Non-Operating Temperature Fahrenheit: -22

F to 164

Centigrade: -30

C to 73

Operating Humidity 15% to 90% (non-condensing)

a. Shipping pallet and packing material weigh an additional 51 pounds (23.13 kilograms).

b. With one DC power supply, redundant Control Modules, and line cards installed in each slot.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 110 111

Keine Kommentare

Riverstone Networks WICT1-12 Spezifikationen Seite 52